If vinyl window units have been shipped loose and yous need to mull the windows together in the field, please follow each stride listed that is the appropriate scenario to your application.

Tools You Will Need:
• Ability drill & contrasted drill $.25
• three/8" vinyl hole plugs
• Vinyl snap mullion or H mullion trim
• Pre-cut treated plywood (size depending on model of window)
• 1/sixteen" ten 3/viii" double-sided glazing record

Step ane - Install 1/16" x iii/eight" double sided glazing record to within of frame of each window and to each side of plywood (meet illustration).

Step 2 - Install (pre-cut to the window size) treated plywood, making sure each piece adheres to the glazing record.

Step 3 - Install the snap mullion (or H mullion) to both the interior and exterior sides of both windows.

Step 4 - From inside the dwelling house, install the #viii x ii" Phillips installation screw in 3-iv locations staggered depending on height of window. If you use the factory prepped location on ane window, make certain to stagger the installation screw on the reverse window to keep the screws from hitting each other.

Step 5 – Install pigsty plugs for the mulled side only.

Steps ane – 5 See "Mulling Vinyl Double Hungs."

Stride 1 - Install 1/16" 10 3/8" double sided glazing tape to inside of frame of each window and to each side of plywood (see illustration).

Footstep 2 - Install the snap mullion (or H mullion) to both the interior and exterior sides of both windows.

Step three - From within the home, install the #8 x 2" Phillips installation spiral in three-four locations staggered depending on peak of window. If you use the factory prepped location on one window, make sure to stagger the installation screw on the reverse window to continue the screws from hitting each other.

Step four – Install hole plugs for the mulled side only.

Step one - Install i/16" x iii/eight" double sided glazing tape to inside of frame of each window and to each side of plywood (see analogy).

Footstep ii - Install (pre-cutting to the window size) treated plywood, making sure each piece adheres to the glazing tape.

Step 3 - Install the snap mullion (or H mullion) to both the interior and outside sides of both windows.

Step 4 - From inside the domicile, install the #8 x 2" Phillips installation screw in iii-4 locations staggered depending on peak of window. If you use the factory prepped location on one window, make sure to stagger the installation screw on the reverse window to go along the screws from hit each other.

Step 5 – Install Hole Plugs for the mulled side only.